Konica-minolta bizhub C200 Manuel d'utilisateur télécharger pdf (Page 47)

C200 1-36

Specifying network settings

7 Touch [New Password], type in the SMTP authentication password, and then touch [OK].

8 Touch [Confirm New Password], type in the SMTP authentication password again, and then touch [OK].

9 Touch [OK] in each screen until the initial screen appears.

Detail

In order to specify SMTP authentication settings, the software switch settings must be specified. For

details, refer to "Specifying security settings for e-mail transmissions (mode 380)" on page 2-14.

If SMTP authentication settings for SMTP reception have been specified on the relay station for the IP

relay operation, SMTP authentication settings must be specified on the machine sending the fax when

the relay station is registered.

1.3.12 RAW Port Number Settings

Parameters

Specifying the settings

1 In the Network Settings screen, touch [RAW Port Number Settings].

2 To change the port number, type in the port number, and then touch [OK].

– To return to the default setting, touch [Default].

Parameter Description

RAW Port Number Set-

tings

The RAW port number can be changed.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 166 167

Pas de commentaire

Konica-minolta bizhub C200 Manuel d'utilisateur Page 47