Konica-minolta bizhub C200 Manuel d'utilisateur télécharger pdf (Page 28)

C200 1-17

Specifying network settings

8 Touch [1].

– For multiple exception settings, settings can be specified for Exception Setting "2" and "3".

9 Use the keypad to type in the starting and ending IP addresses, and then touch [OK].

– The IP address cannot be specified to begin with "0.", "127.", or a number greater than "224".

– To enter a number with less than 3 digits, touch [→] to move the cursor to the next number.

10 Touching [OK] displays the following screen. To apply the new settings, turn the machine off, then on

again.

Detail

In order to specify SMTP authentication settings, the software switch settings must be specified. For

details, refer to "Specifying security settings for e-mail receptions (mode 383)" on page 2-15.

Reminder

When turning the machine off, then on again, wait about 10 seconds to turn the machine on after turning

it off. The machine may not operate correctly if it is turned on immediately after being turned off.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 166 167

Pas de commentaire

Konica-minolta bizhub C200 Manuel d'utilisateur Page 28