Konica-minolta Magicolor 5440 DL Manuel d'utilisateur télécharger pdf (Page 71)

Duplexing

Select paper with high opacity for duplex (2-sided) printing. Opacity refers to

how effectively paper blocks out what is written on the opposite side of the

page. If the paper has low opacity (high translucency), then the printed data

from one side of the page will show through to the other side. Check your

application for margin information. For best results, print a small quantity to

make sure the opacity is acceptable.

Duplex (2-sided) printing can be done manually or can be done automatically

with the duplex option installed and selected.

Note

Only plain paper, 60–90 g/m

(16–24 lb bond) can be autoduplexed. See

“Media Specifications” on page 38.

Duplexing envelopes, labels, postcards, thick stock, glossy stock or

transparencies is not supported.

How do I autoduplex?

You should verify that the duplex option is physically installed on the printer to

successfully duplex the job. If the duplex option is not installed and duplex job

is sent, the control panel will display DUPLEX OPTION NOT ATTACHED.

Check your application to determine how to set your margins for duplex

printing.

The following Duplex/Booklet settings are available.

If “Short Edge Binding” is selected, the pages will be laid

out to flip at the top.

If “Long Edge Binding” is selected, the pages will be laid out

to flip at the side.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 163 164

Pas de commentaire

Konica-minolta Magicolor 5440 DL Manuel d'utilisateur Page 71