Konica-minolta Magicolor 5440 DL Manuel d'utilisateur télécharger pdf (Page 51)

Media Types

Envelopes

Print on the front (address) side only. Some parts of the envelope consist of

three layers of paper—the front, back, and flap. Anything printed in these lay-

ered regions may be lost or faded.

Use envelopes that are

Common office envelopes approved for laser printing with diagonal joints,

sharp folds and edges, and ordinary gummed flaps

Because the envelopes pass through heated rollers, the gummed

area on the flaps may seal. Using envelopes with emulsion-based

glue avoids this problem.

Approved for laser printing

Dry

DO NOT use envelopes that have

Sticky flaps

Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-

ing

Transparent windows

Too rough of a surface

Material that will melt, vaporize, offset, discolor, or emit dangerous fumes

Been presealed

Capacity Tray 1/2/3

Not supported

Manual Feed

Tray

Up to 10 envelopes, depending on their

thickness

Orientation

Face down

Driver

Media Type

Envelope

Weight

91–163 g/m² (25–43 lb bond)

Duplexing

Not supported

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 163 164

Pas de commentaire

Konica-minolta Magicolor 5440 DL Manuel d'utilisateur Page 51