Konica-minolta Magicolor 5440 DL Manuel d'utilisateur télécharger pdf (Page 39)

Configuration Menu Overview

Network Menu

If the printer is connected to a network, the following settings should be spec-

ified. For details about each setting, contact your network administrator.

All factory default values are shown in bold.

DHCP

Settings

DHCP SET:ON

BOOTP SET:OFF

DHCP SET:OFF

BOOTP SET:ON

DHCP SET:OFF

BOOTP SET:OFF

If there is a DHCP server on the network, specifies whether

the IP address is automatically assigned by the DHCP server

and other network information is loaded.

BOOTP

Specifies whether the IP address is automatically assigned by

BOOTP and other network information is loaded.

ADDRESS

Setting

192.168.1.2

Sets the IP address of this printer on the network. Use the Up,

Down, Left, and Right keys to enter the value.

When manually setting the IP address, first set DHCP and

BOOTP to

OFF

SUBNET

MASK

Setting

255.255.255.0

Sets the subnet mask value of the network. Use the Up,

Down, Left, and Right keys to enter the value. When manually

setting the Subnet Mask, first set DHCP and BOOTP to

OFF.

GATEWAY

Setting

192.168.1.1

If a router is used on the network, enter the IP address of the

router. Use the Up, Down, Left, and Right keys to enter the

value. When manually setting the Gateway, first set DHCP

and BOOTP to

OFF.

MAC

ADDRESS

Displays the Ethernet hardware address for this printer. (It

cannot be changed.)

HTTP

Settings

ON / OFF

HTTP can be set to ON or OFF. ON enables the Internal Web

Page inside the printer,

OFF disables it.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 163 164

Commentaires sur ces manuels

Pas de commentaire

Konica-minolta Magicolor 5440 DL Manuel d'utilisateur Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Konica-minolta Magicolor 5440 DL