Konica-minolta bizhub 4050 Manuel d'utilisateur télécharger pdf (Page 32)

[Introduction] 5-2

5.1 Loading the original into the ADF

5 Loading the Original

5.1 Loading the original into the ADF

Original available for ADF

Do not load the following originals into the ADF. Doing so may cause an original paper jam, or damage the

originals.

- Wrinkled, folded, curled, or torn originals

- Highly translucent or transparent originals, such as transparencies or diazo photosensitive paper

- Coated originals such as carbon-backed paper

- Original that is less than basic weight 14 lb (52 g/m

) or greater than 32 lb (120 g/m

)

- Originals that are bound, for example, with staples or paper clips

- Originals that are bound in booklet form

- Originals with pages bound together with glue

- Originals with pages that have had cutouts removed or that are cutouts

- Label sheets

- Offset printing masters

- Photographic Paper

- Glossy original such as gloss coated paper

Loading the original into the ADF

The ADF feeds original sheets one by one in order from the top, and automatically loads them. It also loads

a 2-sided original automatically.

The ADF is helpful when loading a large number of original.

1 Put the first page of an original at the top, and load the original into the Document Feed Tray with the

side to be photocopied facing upward.

% Load the original so that its top side is placed at the back. When loading in a different orientation,

be sure to specify the loading direction of originals.

Item Specifications

Original types Plain paper (14lb to 32 lb (52 g/m

to 120 g/m

))

Max. original size A4 or Legal

(Fax only: 8-1/2 inches e 39-3/8 inches (215.9 mm e 1000 mm))

Original loading capaci-

Max. 50 sheets (20 lb (75 g/m

))

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 85 86

Pas de commentaire

Konica-minolta bizhub 4050 Manuel d'utilisateur Page 32