Konica-minolta bizhub 4050 Manuel d'utilisateur télécharger pdf (Page 12)

[Network Fax Functions] 3-3

3.1 Sending (basic operation flow)

4 Tap [Application], then configure fax option settings.

% Specify the original size before scanning the original. For details on how to specify the original size,

refer to page 3-11.

% You cannot transfer an original that exceeds the A4 or letter width (216 mm / 8.5 inches).

% For details on configuring option settings, refer to the respective columns of the following table.

5 Press the Start key.

% Tap [Check Settings] before sending data, and check the specified destination and settings if nec-

essary.

% To redo operations for specifying destinations or option settings, press the Reset key.

% If you press the Stop key while scanning the original, scanning stops. To cancel scanning the orig-

inal, delete inactive jobs from the Job screen.

Sending starts.

Tips

- When an Internet fax is sent, the TX result report is printed. With the TX result report, you can check for

successful fax transmission.

- When the recipient machine receives an Internet fax, an MDN message that provides notification of suc-

cessful reception is printed on this machine. You can check whether or not the fax has been success-

fully received by reading the MDN message.

Purpose Reference

To configure basic options such as original size and resolution page 3-11

To specify the method to scan the original page 3-12

To adjust the image quality or density depending on the contents of the original page 3-13

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Pas de commentaire

Konica-minolta bizhub 4050 Manuel d'utilisateur Page 12