Konica-minolta bizhub 25e Manuel d'utilisateur télécharger pdf (Page 92)

Operating on control panel

Printing documents saved in USB memory 4-3

Select the document you want to print, and press [Enter].

•To review the document properties, press the located next to the ﬁle. You can check the

ﬁlename, ﬁle path, ﬁle size, and date and time the ﬁle was updated.

•Press [Root] to return to the root directory of the USB memory.

•Press [Back] to return to the previous screen.

•Press [Cancel] to close the screen.

•You cannot select multiple ﬁles at the same time.

Enter the number of copies to print using the numeric keys.

To specify the paper to use for printing, select a paper cassette.

To set the bypass paper, press [Bypass] and set the paper.

To sort the output, press [Sort]. Select the sorting method, and press [Enter].

If the document to print is an encrypted PDF, press [PDF Password]. Enter the

password, and press [Enter].

Press <Start>.

•To cancel the printing, press <Stop>.

•To continue printing other ﬁles, press [USB Memory] and repeat the steps from step 3.

When printing is ﬁnished, disconnect the USB memory device.

NOTE

Also, you can perform the “USB to Print” by following procedure.

Press [Print] on My MFP Menu screen.

If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Online Mode” (Print

Ready) screen is displayed.

Press [USB Memory].

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 119 120

Pas de commentaire

Konica-minolta bizhub 25e Manuel d'utilisateur Page 92