Konica-minolta BIZHUB 223 Manuel d'utilisateur télécharger pdf (Page 92)

bizhub 423/363/283/223 5-36

5.4 [Application]

d Reference

To set the zoom:

Press [Basic] ö [Zoom].

5.4.5 [Image Adjust]

Copies the original image at the center of the paper when the paper is larger than the original.

% Press [Application] ö [Image Adjust].

Settings

[Margin Position] Select an option from [Auto], [Left], [Top] and [Right].

When Auto is selected, the binding position is automatically set.

• This function automatically determines the binding position according to

the orientation of the loaded original. If the original length is 11-11/16

inches (297 mm) or less, a binding position along the long side of the pa-

per is selected. If the original length is more than 11-11/16 inches (297

mm), a binding position along the short side of the paper is selected.

• The binding position is set on the upper or left-side end.

• Be sure to load the original so that its top side is placed in the back. If

the original is loaded in any other orientation, this setting fails.

[Image Shift] Adjust the image position according to the binding margin.

[Change Back Shift] Adjust the image position on the back side of the

paper in the 2-sided copy mode.

[Adjust Value] • Inch area: Press [+] or [-] to specify the binding margin width (1/16 to 3/4

inch). When [None] is selected, the binding margin width is set to 0 inch-

es.

• Metric area: Enter the binding margin width (0.1 to 20.0 mm). When

[None] is selected, the binding margin width is set to 0 mm.

[Original Direction] Select the orientation of the original loaded into the ADF or placed on the

Original Glass.

Settings

[Centering] Copies the original image at the center of the paper without enlarging it.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 265 266

Pas de commentaire

Konica-minolta BIZHUB 223 Manuel d'utilisateur Page 92