Konica-minolta magicolor 5650 Manuel d'utilisateur télécharger pdf (Page 220)

Network Printing200

2 Turn on the power of the machine while it is connected to the network.

 Since the printer is searched for, be sure to connect the machine to

the network.

3 To use the Web service print, check that [Network discovery] is enabled in

[Network and Sharing Center] on the computer.

4 Open the [Network] window.

 In Windows Vista/Server 2008, click [Start], and [Network].

 In Windows 7/Server 2008 R2, open [Computer] and click [Network].

If [Network] is not displayed in [Computer], click the [Network and

Internet] category on the [Control Panel], and also click [View network

computers and devices].

Connected computers and devices are detected.

5 Select the device name of the machine, and then click [Install] on the tool-

bar.

The printer driver for this machine is detected and the machine is ready to

print.

6 After finishing the installation, make sure that the icon for the installed

printer is displayed in the [Printers] or [Devices and Printers] window.

" If the printer driver is not correctly installed, the driver must be

updated using [Update Driver ...]. For details, refer to “Updating the

driver after connecting this machine” on page 208.

" In Windows Vista/Server 2008, you can continue the task and

specify the printer driver installation disk to install the printer driver

if it is not installed in advance.

When the [Found New Hardware] window appears, follow the dis-

played messages to perform the procedure. For details, refer to

“Adding a printer from the Network window” on page 201.

" In Windows 7/Server 2008 R2, you cannot specify the installation

disk after the machine is connected to the computer. Install the

printer driver in advance (Step 1).

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 429 430

Pas de commentaire

Konica-minolta magicolor 5650 Manuel d'utilisateur Page 220