Konica-minolta bizhub PRESS C6000 Manuel d'utilisateur télécharger pdf (Page 1)

Part Number: 45097576

February 17, 2011

*45097576*

Upgrading the Fiery PRO

80C-KM or

Fiery PRO

70-60C-KM Color Server to

System Version 2.0

Overview

This document describes how to upgrade the Fiery PRO

80C-KM or Fiery PRO

70-60C-KM Color Server to system software version 2.0.

Notify the network administrator at the customer site that some archived jobs may no longer

print after you install version 2.0 system software.

NOTE: The term “Fiery PRO

” is used in this document to refer to the Fiery PRO

80C-KM

or Fiery PRO

70-60C-KM Color Server.

Contents of this kit

In addition to this document, this kit contains:

• Two 1GB DIMMs — for upgrading the memory from 2GB to 4GB.

• BIOS Upgrade CD — for upgrading the BIOS from version 1.31 to version 1.55.

• One-time use dongle — for upgrading the BIOS from version 1.31 to version1.55.

•Media Package

– System Software Package — System Software version 2.0 for installation on the

Fiery PRO

following the BIOS upgrade procedure.

– User Software Package — User Software for installation on client computers; User

documentation CD; printed release notes; additional documentation.

Procedures

The list below is a summary; see the complete procedures in the following pages.

To upgrade the Fiery PRO

, perform the following procedures in the order shown below.

1. Install the additional DIMMs (see page 2).

2. Upgrade the BIOS (see page 3).

3. Install system software (see page 4).

Installing system software deletes everything on the HDD. Coordinate with the network

administrator at the customer site before installing system software.

4. Verify the product upgrade (see page 6).

1 2 3 4 5 6 7

Résumé du contenu

Page 1 - System Version 2.0

Page 2 - O INSTALL THE DIMMS

Page 2 of 7Part Number: 450975767TO INSTALL THE DIMMS1. Shut down and then open the Fiery PRO80 (see the Installation and Service Guide). To access th

Page 3 - O UPGRADE THE BIOS

Page 3 of 7Part Number: 450975767TO UPGRADE THE BIOS1. Verify the current BIOS version.Print a Configuration page and verify the BIOS version shown in

Page 4 - O INSTALL SYSTEM SOFTWARE

Page 4 of 7Part Number: 450975767TO INSTALL SYSTEM SOFTWARENOTE: This procedure assumes that you have already upgraded the BIOS as described on page 3

Page 5

Page 5 of 7Part Number: 4509757679. At the message “Please insert User Software to continue installation,” insert the User Software DVD into the DVD d

Page 6 - O VERIFY THE PRODUCT UPGRADE

Page 6 of 7Part Number: 45097576713. If user documentation was stored on the Fiery PRO80, advise the site administrator to reinstall the documentation

Page 7 - Error messages

Page 7 of 7Part Number: 450975767Error messagesOne of the following error messages may display on the Control Panel when you attempt to perform the up