Konica-minolta bizhub C200 Manuel d'utilisateur Page 61
- Page / 176
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
C200 4-19
Transmitting data
4
2
Note
For details on registering domain names, refer to "One-Touch/Box Reg. - Domain Name" on
page 8-22.
If the optional fax kit has not been installed, [Address] appears instead of [Dial].
Scanning Mode
With Internet faxing, when the fax is sent using a transmission size, transmission resolution or coding method
that is not supported by the receiving device, it may not be possible for the recipient to view the received
data. If the maximum values are specified, the data is sent with those previously specified settings, even if
settings unsupported by the receiving device were specified.
!
Detail
If the image data is too large, there will be a large load on the network. In addition, communication may
not be possible, depending on the network environment.
To specify the desired setting for each parameter, select the corresponding parameter, and then
change the setting.
Some images cannot be viewed on the recipient’s computer, depending on the encoding method.
Selecting "MH" increases the possibility that the image can be viewed.
The size of the encoded data depends on the image data. However, data amount for the encoding
methods generally increase as follows: MMR, MR, MH.
4.3.8 Dial - IP Addr. Fax
Type in the destination of the IP address fax.
- Host: A host name can be typed in. The DNS settings (specified from the Network Setting screen) must
be specified first.
- Port: Using the keypad, type in the port number to be used. (Range: 1 to 65535)
- Add: Touch this button to specify an additional destination.
Parameter Description
TX Size (Max.) Select the maximum original size compatible with the recipient’s machine.
TX Resolution (Max.) Select the maximum resolution compatible with the recipient’s machine.
Coding Method Select the coding method compatible with the recipient’s machine.
- Introduction 2
- Using menu trees 4
- Contents 5
- 11 Appendix 12
- 12 Index 12
- About this manual 13
- Screen images 14
- C200 x-14 15
- C200 x-15 16
- User’s Guides 17
- Before using Network 18
- Scan/Fax/Network Fax 18
- 1.1 Information 19
- 1.1.2 Account track 20
- 1.2 Overview 21
- 1.2.2 Available Fax functions 22
- Control panel/touch panel 25
- 2 Control panel/touch panel 26
- C200 2-3 27
- Reminder 27
- 2.2 Touch panel 28
- Sent documents 96 30
- Received documents 96 30
- Type Description 31
- 1 Select an RX user box 32
- 2.3.1 Checking the settings 34
- 2 Touch [Register] 35
- 3 Touch [Default Settings] 35
- Registration of basic 38
- 3.1 To begin operation 39
- Administrator] 40
- 3.2 Address Registration 41
- 3.3 Optional settings 42
- Transmitting data 43
- 4 Transmitting data 44
- C200 4-3 45
- 4.1.2 Fax (G3)/Broadcasting 46
- C200 4-5 47
- 4.1.3 Recalling a program 48
- C200 4-7 49
- 4.3.1 Screen layout 53
- 4.3.2 One-Touch 53
- 4.3.3 Search One Touch 55
- 4.3.4 LDAP Search 56
- 4.3.5 Dial 58
- 4.3.6 Dial - Fax 59
- 4.3.7 Dial - Internet Fax 60
- 4.3.8 Dial - IP Addr. Fax 61
- 4.3.9 Dial - IP Relay 62
- 4.3.10 Dial - E-Mail 63
- 4.3.11 On-Hook (G3) 63
- 4.4 Quality settings 65
- 4.4.3 Reduction/Area (G3) 67
- 4.4.4 Color (E-Mail/FTP/SMB) 68
- 4.5 Fax Menu 70
- Setting Description 71
- 4.5.10 Fax - Password TX (G3) 74
- 4.5.11 Fax - Remote Copy (G3) 74
- C200 4-38 80
- 4.6 Redialing 81
- Receiving data (G3/IP/I-FAX) 82
- 5.1 Receiving (G3) 83
- 5.2 Receiving (I-FAX) 84
- 5.2.3 Activity Report 85
- 5.2.4 RX Doc. Header Print 85
- C200 5-5 86
- 5.3 Receiving (IP) 87
- 5.4 Memory reception 88
- 5.5 Printing received faxes 89
- 6.1 Memory RX (GS3/IP/I-FAX) 93
- Sender ReceiverConfidential 94
- 6.3 Polling TX/RX (G3) 95
- 6.4 Bulletin (G3) 96
- 6.6 Forwarding Fax (G3) 98
- Explanation of reports/lists 99
- 7.1 Types of reports/lists 100
- 7.2 Print List menu tree 101
- 7.3 Common lists 102
- 7.3.2 RX Report 103
- 7.3.3 Bulletin List 104
- 7.3.4 One-Touch List 105
- 7.3.5 Program List 106
- 7.4.1 Activity Report 107
- 7.4.2 TX Report 107
- 7.4.3 Broadcast Report 108
- 7.4.4 Setting List 109
- 7.5.1 Memory Clear Report 110
- User Settings / User 111
- Management / One 111
- Touch/Box Reg 111
- 8.1.1 User Settings 112
- 8.1.2 User Management 112
- 8.1.3 One-Touch/Box Reg 113
- 8.2 User Settings 115
- 8.3 User Management 119
- 1 Touch [Memory RX ON/OFF] 120
- 3 To print, touch [Lock OFF] 120
- 2 Touch [One-Touch/Box Reg.] 121
- 3 Touch [One-Touch] 121
- 8.4.3 One-Touch Copy 124
- 8.4.5 Specifying fax settings 125
- Parameter Description 126
- 3 Touch [Bulletin] 133
- Administrator Management 135
- 9.1 Initial settings 136
- 9.1.5 E-Mail 137
- 9.1.6 SMB 137
- 9.1.7 FTP 137
- 9.2.1 System Settings 138
- 9.2.2 Administrator Settings 138
- 9.2.3 Document Management 139
- 9.2.4 Fax Settings 139
- 9.2.5 TX Settings 140
- 9.2.6 RX Settings 140
- 9.2.7 Report Settings 140
- C200 9-8 142
- 9.4 Administrator Settings 143
- 9.5 Document Management 144
- 9.6 Fax Settings 151
- 9.7 TX Settings 155
- 9.8 RX Settings 156
- 9.9 Report Settings 158
- Fax/Scan function 159
- 10.1 Cannot send data 160
- 10.2 Cannot receive data 161
- C200 10-4 162
- 10.3.1 G3 Fax 163
- 10.4 Error code lists 164
- 10.4.4 SMB file transmission 165
- 10.4.6 IP relay transmission 166
- 7 CAUTION 167
- Appendix 168
- 11.1.7 Faxing specifications 170
- 11.2 Entering text 171
- Copyright 176
- 2008.11A02F-9589-11 176
Produits connexes et manuels pour Imprimeurs Konica-minolta bizhub C200
(1 pages)
(48 pages)© 2020, manymanuals.fr. Tous droits réservés | 3.725 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels