Konica-minolta bizhub 4050 Manuel d'utilisateur télécharger pdf (Page 20)

[Maintenance/Troubleshooting] 3-3

3.2 When a paper jam has occurred

To prevent a failure, carefully remove jammed paper so that it does not tear. Even if only a large or small slip

of paper is left in this machine, it will cause a paper feed failure, resulting in a paper jam.

If a paper jam occurs on this machine, a message notifying that a paper jam has occurred is displayed on the

Touch Panel.

Tips

After the jammed paper has been removed, open and close the Front Cover regardless of the location of the

paper jam.

3.2.1 Clearing a paper jam in the Manual Feed Tray

1 Securely hold both sides of the jammed paper, then carefully pull it out.

% Completely remove the jammed paper so that no slip of paper is left inside.

2 Flip through the removed paper, the align the edges.

3 Load paper again.

4 Open and close the Front Cover.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Pas de commentaire

Konica-minolta bizhub 4050 Manuel d'utilisateur Page 20