Konica-minolta bizhub 25e Manuel d'utilisateur télécharger pdf (Page 12)

Printing or copying on envelopes

When you print or copy on envelopes, use the following procedures to reduce wrinkles.

The fuser unit, as well as the area around the fuser, becomes extremely hot during

machine operation. When changing the switch positions, be careful not to touch other

areas around the fuser unit than the switches. Doing so may cause burns.

IMPORTANT

•When you have ﬁnished printing or copying envelopes, be sure to return the switch-

es to their original positions. If you fail to do this, the print quality may decrease.

•Do not touch the terminals inside the machine or feeder roller. This could cause

defects in the print quality.

Open the side cover.

Pull up the switches on both sides of the fuser to the envelope

positions.

Pull them up until you hear them snap into place.

Close the side cover.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Pas de commentaire

Konica-minolta bizhub 25e Manuel d'utilisateur Page 12