Konica-minolta DiMAGE X Manuel d'utilisateur télécharger pdf (Page 44)

RECORDING MODE

LCD brightness

The brightness of the LCD monitor can be set in eleven

levels. After selecting the LCD brightness option and

pressing the enter button on the menu (p. 28, 54), the LCD

brightness screen will be displayed. Pressing and holding

the display button will also active the LCD brightness

screen.

Use the left and right keys (1) to adjust the brightness

level; the monitor image will change accordingly. To set the

level, press the enter button (2); the camera will return to

the recording or playback mode. The LCD brightness level

will affect both modes.

Auto-power-off menu settings

To conserve battery power, the camera will shut down if an operation is not made within a certain

period. To restore power, press the main switch. The length of the auto-power-off period can be

changed in the setup 1 section of the recording and playback-mode menu (p. 28, 54): 1, 3, 5, 10,

and 30 minutes. The length of the auto-power-off period is fixed at 10 minutes when the camera is

connected to a computer.

Audio signals

The camera’s audio signals can be turned off and on in the setup 1 section of the recording and

playback-mode menu (p. 28, 54).

Enter

Low

High

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 87 88

Pas de commentaire

Konica-minolta DiMAGE X Manuel d'utilisateur Page 44