Konica-minolta DiMAGE S404 Manuel d'utilisateur télécharger pdf (Page 35)

The continuous-advance drive mode allows a series of images to be captured while holding down the

shutter-release button. Continuous advance acts like a motor drive on a film camera. The number of

images that can be captured at one time and the rate of capture depend on the image-quality and

image-size setting. The maximum rate of capture is 1.3 fps. The continuous-advance mode is set with

the drive-mode button (p. 32).

When the shutter-release button is pressed and held, the camera will begin recording images until

the maximum number has been taken or the shutter button is released. This mode cannot be used

with super-fine images (p. 41). The built-in flash can be used, but the rate of

capture is reduced because the flash must recharge between frames.

Compose the picture as described in the basic recording operation section (p. 23).

Press the shutter-release button partway down to lock the exposure and focus for

the series. Press and hold the shutter-release button all the way down (1) to begin

taking pictures.

The following chart lists the maximum number of images that

can be captured with different image-quality and image-size

combinations.

Economy

Standard

Fine

2272 X 1704

Image

Quality

Image

Size

1600 X 1200 1280 X 960 640 X 480

CONTINUOUS ADVANCE

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 115 116

Pas de commentaire

Konica-minolta DiMAGE S404 Manuel d'utilisateur Page 35