Konica-minolta bizhub C451 Manuel d'utilisateur télécharger pdf (Page 93)

Troubleshooting

6-4 C451

The stapling position

is not as expected.

The orientation setting is not cor-

rect.

Check the stapling position in the

printer driver setup dialog box.

The hole punch func-

tion cannot be speci-

fied.

Hole punching cannot be speci-

fied if “Booklet”, “Transparency”,

“Thick2”, “Thick3”, or “Envelope”

is selected.

Check each setting in the printer

driver.

Optional finishers and punch kit

are required.

Install the required optional finish-

er and enable it using the printer

driver.

The pages are not

punched.

Printed pages may be fed out

without being punched if the pa-

per is loaded into the paper

source with an incorrect orienta-

tion.

Check the orientation setting.

The hole punch posi-

tion is not as expect-

ed.

The orientation setting is not cor-

rect.

Check the punch position in the

printer driver setup dialog box.

The overlay is not

printed properly.

Available computer memory

space is not sufficient.

Simplify the overlay to reduce the

data size.

The image is not print-

ed properly.

Available computer memory

space is not sufficient.

Simplify the image to reduce the

data size.

Paper is not fed from

the specified paper

source.

Paper will not be fed from the

specified paper source if that pa-

per source is loaded with paper of

a different size or orientation.

Load the paper source with paper

of the appropriate size and orien-

tation.

Symptom Probable cause Action

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 101 102

Commentaires sur ces manuels

Pas de commentaire

Konica-minolta bizhub C451 Manuel d'utilisateur Page 93

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Konica-minolta bizhub C451