Konica-minolta bizhub C200 Manuel d'utilisateur télécharger pdf (Page 50)

C200 x-49

Control panel

The control panel consists of the touch panel, which can be used to specify settings for the various functions,

and various keys, such as the [Start] key and the [Stop] key. The operations that can be performed with these

keys are described below.

In this manual, [ ] indicates keys on the control panel and buttons in the touch panel.

No. Part name Description

1 Touch panel Displays various screens and messages.

Specify the various settings by directly touching the panel.

2 [Mode Check] key Press to check the various settings.

3 [Utility/Counter] key Press to display the Utility screen and the Meter Count screen.

4 [Fax/Scan] key Press to enter Fax/Scan mode.

While the machine is in Fax/Scan mode, the indicator on the [Fax/Scan] key

lights up in green.

5 [Copy] key Press to enter Copy mode. (As a default, the machine is in Copy mode.)

While the machine is in Copy mode, the indicator on the [Copy] key lights up

in green.

6 [Reset] key Press to clear all settings (except programmed settings) entered in the control

panel and touch panel.

7 [Access] key When account track settings have been applied, press this key to log on to a

registered account after entering the account name and password, and to log

off.

8 Sub power switch Press to turn on/off machine operations. When turned off, the machine enters

a state where it conserves energy.

9 [Interrupt] key Press to enter Interrupt mode. While the machine is in Interrupt mode, the in-

dicator on the [Interrupt] key lights up in green and the message "Now in Inter-

rupt mode." appears on the touch panel. To cancel Interrupt mode, press the

[Interrupt] key again.

10 [Stop] key Press while copying to stop the operation. The copy job being performed is

deleted.

If the [Stop] key is pressed during scanning or dialing, a screen appears, re-

questing confirmation to delete a job. In the confirmation screen, select the job

to be deleted.

11 [Start] key Press to start the copy, scan or fax operation. When this machine is ready to

begin the operation, the indicator on the [Start] key lights up in blue. If the in-

dicator on the [Start] key lights up in orange, the operation cannot begin.

Press to restart a stopped job.

12 Main power indicator Lights up in green when the machine is turned on with the main power switch.

13 Keypad Use to type in the number of copies to be produced.

Use to type in the zoom ratio.

Use to type in the various settings.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 185 186

Pas de commentaire

Konica-minolta bizhub C200 Manuel d'utilisateur Page 50