Konica-minolta bizhub 4050 Manuel d'utilisateur télécharger pdf (Page 13)

[PC-FAX Functions] 2-6

2.3 Easy installation of the fax driver

6 Select this machine, then click [Next].

% If this machine is not detected, restart it.

% You do not need to change the printing method from [Normal Printing] (Port 9100) unless otherwise

specified by the administrator.

% As the printing method, you can select [Normal Printing], [Internet Printing] (IPP), or [Secure Printing]

(IPPS).

% Among the connected printers, only the target model is automatically detected and displayed. If

multiple target models are displayed, check the IP addresses.

% If the connection to this machine cannot be recognized, it is not displayed in the list. In such a case,

select [Specify the Printer/MFP Except for the Above. Select (IP Address, Host Name...)], then man-

ually specify the IP address and host name of this machine.

7 Select the check box of the fax driver, then click [Next].

8 Check the components to be installed, then click [Install].

9 If necessary, change the printer name or print a test page, then click [Finish].

Installation of the fax driver is then completed.

dReference

Be sure to initialize the fax driver after you have installed it. For details, refer to page 2-7.

Settings Description

[Review] Displays the installed components for checking.

[Rename Printer] Changes this machine name, if necessary.

[Property] Sets the optional operating environment of this machine. For details, refer to

page 2-7.

[Print Setting] Changes the default print settings of this machine, if necessary. For details, re-

fer to page 2-7.

[Print Test page] Prints a test page to check the normal data transfer, if necessary.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

Pas de commentaire

Konica-minolta bizhub 4050 Manuel d'utilisateur Page 13