Konica-minolta MAXXUM 50 Manuel d'utilisateur télécharger pdf (Page 38)

38 A

DVANCED OPERATION

EXPOSURE MODES

The exposure modes control how

the shutter speeds and aperture

are changed. Four modes are

available.

Turn the function dial to the

exposure-mode position (1).

While pressing the function button

(2), turn the control dial (3) until

the appropriate exposure mode is

displayed on the data panel.

Release the function button.

Program - controls both the shutter speed and aperture

required for each exposure. The operation is the same as

described in the taking-a-picture section on page 21.

Aperture priority - the photographer specifies the

aperture, the camera sets the appropriate shutter speed for

the required exposure (p. 39).

Shutter priority - the photographer specifies the shutter

speed, the camera sets the appropriate aperture for the

required exposure (p. 40).

Manual exposure - the photographer specifies both the

shutter speed and aperture for the exposure (p. 44). Bulb

exposures can be made (p. 45).

If the light levels are outside the metering range of the camera, both

viewfinder exposure indicators blink. In dark conditions, use the camera

flash. Under bright light, use a neutral density filter to control the light

level.

Camera Notes

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

Pas de commentaire

Konica-minolta MAXXUM 50 Manuel d'utilisateur Page 38